好湿好浪好紧好大好爽岳_在满员痴汉巴士被搓揉_亚洲精品愉拍一区二区_2021天天躁夜夜躁西西

Screw vacuum pump
Your Position:Home»Products»Screw vacuum pump
VP series screw vacuum pump

☆Working pressure:

☆Capacity:6.851-96.885M3/Min

Motor power range:11-160 kW

VP series screw vacuum pump

Kaitec screw vacuum pump have high working efficiency,due to the patent design of  flexible screw compressor,

VP series vacuum pump  energy consumption 20% lower than other types of vacuum pump.The main motor under the same capacity, one stage smaller than any other screw vacuum pump.

High efficient separation system

Using high technology seal/lubricant  to seal the rotor in the vacuum pump host,lubricant bearing,and provide cooling and radiating.Contains lubricant Exhaust air mixture containing purification through a multi-stage separation system.The unit flow filter surface area of this separation system is the highest in this industry,best separation effect.Reduce the lubricant lost.Using two stage separation.

Advanced boot device

Reduce the mechanical shock,reduce the demand for power grid,improve the service life of vacuum pump.Motor starting from zero voltage soft start,avoid the problem of shortage of the triangle starting torque.Greatly reduced impact to the motor, compressor, power grid.

Take out vacuum no throttling inlet design

VP series special inlet design and patented flexibility screw compressor design make it from atmospheric pressure to the biggest vacuum can be run at full capacity.This means,When there are sudden load demand can better maintain system vacuum .

Other type using inlet throttling design when system take out vacuum,decreases the inlet load.If system vacuum suddenly reduce,will have to protect itself,in case of motor overload.Moreover VP series vacuum pump can under any vacuum degree,because using flexibility screw compressor,the exhaust orifice are optimal,most save energy consumption,all can be run at full capacity to maintain the system vacuum degree.

High vacuum ability

Kaitec vacuum pump maximum vacuum degree can over 29.9inHg .

This also allow vacuum pump installed in any need stable, continuous vacuum application occasion.

Oil pump compulsive lubrication

Microcomputer control panel

System vacuum degree adjust

Kerry air inlet filter

Kerry air inlet valve
Kerry oil filter

Kerry8000 Synthesis coolant

Energy saving electromotor

Air-cooling or water-cooling
Oil and air separator pressure indicator

High temperature protection system downtime

EMO Emergency Off

Screw vacuum pump technical parameters

Model

Volume flow m3/min

Motor power kW

Dimensionmm

VP11-7

6.851

11

1890x1230x1250

VP18-11

11.073

18.5

2040x1330x1410

VP30-18

17.91

30

2440x1660x1710

VP37-26

25.775

37

2610×1710×1810

VP55-40

39.35

55

2810×1960×1810

VP90-59

58.661

90

3200x2200x2100

VP160-97

96.885

160

4300x2400x2500